Mumbai, Maharashtra
GST No. 27ABDCS9000R1ZU
Call 08048619468 76% Response Rate
Product Brochure
Unit Pipe Length | 6 m |
Material | Steel |
Thickness/Diameter | 0-1 inch, 1-2 inch, 2-3 inch, 3-4 inch, >4 inch |
Single Piece Length | 3 meter, 6 meter |
Earthing Jumpers are commonly referred to as flange earthing jumpers, grounding jumpers, bonding jumper, and copper earth braids. They are made from copper strips and copper wires depending upon the customer’s specific requirement. The copper wires are braided, stranded or twisted as asked by the customer and are then crimped with copper lugs or copper ferrules to make these jumpers.
The braids and terminations are usually tin plated in order to prevent metal corrosion. Many times insulation is also done depending on the exact application and requirements.
SIMCO specializes in manufacturing copper earthing jumpers. With the help of our highly skilled personnel, adoption of latest technologies and by using raw materials of utmost quality, we have been able to provide earthing jumpers to many government, semi-government and major private organizations in the Oil&Gas and Chemical Industry. We can practically manufacture the braids of any length and cross-section area along with termination lugs and ferrules with hole dia as per customer’s requirements.
Copper earthing jumper helps in passing the static current from source to earth, thus preventing the hazards caused by static electricity. Static electricity is nothing but an unbalanced electric charge within or on the surface of a material. The electric charge remains until it is able to get discharged by means of an electric current or electrical discharge. It is created whenever two surfaces contact and separate, and at least one of them has a higher resistance to electric current (and is, therefore, an electrical insulator). If proper measures are not taken then the sparks generated through static energy can lead to explosions and industrial fire. Hence, proper bonding or grounding needs to be ensured. Braided copper is the most preferred method for effective bonding as its a strong conductor.
Applications of Earthing Jumpers:
View Complete details
Product Brochure
Usage/Application | Construction |
Material | Steel |
Feature | Corrosion Resistant |
Thickness | 5 - 30 mm |
Country of Origin | Made in India |
Flat steel products consist of sheets and plates. They are rolled from slabs, which are a semifinished steel product. These products are used in a wide range of industries such as automobile, domestic appliances, shipbuilding, and construction. SIMCO manufactures and supplies steel flats in 201, 202, 303, 304/304L, 310, 316/316L, 321, 347, 410, 420, 446 and any other grade as asked for. They are manufactured and supplied in various dimensions as per customer’s requirements.
These products are broadly utilized for making of Pipes, Hardware fittings, Rolling Shutters, Water Coolers, Floor Tiles, Storage tanks of Geysers, Cans, Tanks, etc.
View Complete details
Product Brochure
Single Piece Length | 6 meter |
Shape | Round |
Material | Steel |
Application | building and construction,military equipment,cement industry,etc. |
Thickness | 30 mm - 100 mm |
View Complete details
Product Brochure
Unit Length | 6 m |
Features | Corrosion Resistant |
Material | Steel |
Application | building and construction,military equipment,cement industry,etc. |
Thickness | 30 mm - 100 mm |
Earthing Jumpers are commonly referred to as flange earthing jumpers, grounding jumpers, bonding jumper, and copper earth braids. They are made from copper strips and copper wires depending upon the customer’s specific requirement. The copper wires are braided, stranded or twisted as asked by the customer and are then crimped with copper lugs or copper ferrules to make these jumpers.
The braids and terminations are usually tin plated in order to prevent metal corrosion. Many times insulation is also done depending on the exact application and requirements.
SIMCO specializes in manufacturing copper earthing jumpers. With the help of our highly skilled personnel, adoption of latest technologies and by using raw materials of utmost quality, we have been able to provide earthing jumpers to many government, semi-government and major private organizations in the Oil&Gas and Chemical Industry. We can practically manufacture the braids of any length and cross-section area along with termination lugs and ferrules with hole dia as per customer’s requirements.
Copper earthing jumper helps in passing the static current from source to earth, thus preventing the hazards caused by static electricity. Static electricity is nothing but an unbalanced electric charge within or on the surface of a material. The electric charge remains until it is able to get discharged by means of an electric current or electrical discharge. It is created whenever two surfaces contact and separate, and at least one of them has a higher resistance to electric current (and is, therefore, an electrical insulator). If proper measures are not taken then the sparks generated through static energy can lead to explosions and industrial fire. Hence, proper bonding or grounding needs to be ensured. Braided copper is the most preferred method for effective bonding as its a strong conductor.
Applications of Earthing Jumpers:
View Complete details
Product Brochure
Single Piece Length | 6 meter |
Material | Steel |
Finishing | Polished |
Application | building and construction,military equipment,cement industry,etc. |
Feature | Corrosion Resistant |
Earthing Jumpers are commonly referred to as flange earthing jumpers, grounding jumpers, bonding jumper, and copper earth braids. They are made from copper strips and copper wires depending upon the customer’s specific requirement. The copper wires are braided, stranded or twisted as asked by the customer and are then crimped with copper lugs or copper ferrules to make these jumpers.
The braids and terminations are usually tin plated in order to prevent metal corrosion. Many times insulation is also done depending on the exact application and requirements.
SIMCO specializes in manufacturing copper earthing jumpers. With the help of our highly skilled personnel, adoption of latest technologies and by using raw materials of utmost quality, we have been able to provide earthing jumpers to many government, semi-government and major private organizations in the Oil&Gas and Chemical Industry. We can practically manufacture the braids of any length and cross-section area along with termination lugs and ferrules with hole dia as per customer’s requirements.
Copper earthing jumper helps in passing the static current from source to earth, thus preventing the hazards caused by static electricity. Static electricity is nothing but an unbalanced electric charge within or on the surface of a material. The electric charge remains until it is able to get discharged by means of an electric current or electrical discharge. It is created whenever two surfaces contact and separate, and at least one of them has a higher resistance to electric current (and is, therefore, an electrical insulator). If proper measures are not taken then the sparks generated through static energy can lead to explosions and industrial fire. Hence, proper bonding or grounding needs to be ensured. Braided copper is the most preferred method for effective bonding as its a strong conductor.
Applications of Earthing Jumpers:
View Complete details
Product Brochure
Application | Ship building,Construction etc., Automobile Industry |
Thickness | 30 mm - 100 mm |
Material | Steel |
Feature | Corrosion Resistant |
View Complete details
Product Brochure
Features | Corrosion Resistant |
Unit Length | 6m |
Steel Grade | SS304 |
Application/Usage | gas, mechanical, sewage, automobile, etc. |
Material | Steel |
Earthing Jumpers are commonly referred to as flange earthing jumpers, grounding jumpers, bonding jumper, and copper earth braids. They are made from copper strips and copper wires depending upon the customer’s specific requirement. The copper wires are braided, stranded or twisted as asked by the customer and are then crimped with copper lugs or copper ferrules to make these jumpers.
The braids and terminations are usually tin plated in order to prevent metal corrosion. Many times insulation is also done depending on the exact application and requirements.
SIMCO specializes in manufacturing copper earthing jumpers. With the help of our highly skilled personnel, adoption of latest technologies and by using raw materials of utmost quality, we have been able to provide earthing jumpers to many government, semi-government and major private organizations in the Oil&Gas and Chemical Industry. We can practically manufacture the braids of any length and cross-section area along with termination lugs and ferrules with hole dia as per customer’s requirements.
Copper earthing jumper helps in passing the static current from source to earth, thus preventing the hazards caused by static electricity. Static electricity is nothing but an unbalanced electric charge within or on the surface of a material. The electric charge remains until it is able to get discharged by means of an electric current or electrical discharge. It is created whenever two surfaces contact and separate, and at least one of them has a higher resistance to electric current (and is, therefore, an electrical insulator). If proper measures are not taken then the sparks generated through static energy can lead to explosions and industrial fire. Hence, proper bonding or grounding needs to be ensured. Braided copper is the most preferred method for effective bonding as its a strong conductor.
Applications of Earthing Jumpers:
View Complete details
Product Brochure
Material | Steel |
Application | construction, food processing, marine, etc. |
Thickness | 5 - 20 mm |
Color | Silver |
Earthing Jumpers are commonly referred to as flange earthing jumpers, grounding jumpers, bonding jumper, and copper earth braids. They are made from copper strips and copper wires depending upon the customer’s specific requirement. The copper wires are braided, stranded or twisted as asked by the customer and are then crimped with copper lugs or copper ferrules to make these jumpers.
The braids and terminations are usually tin plated in order to prevent metal corrosion. Many times insulation is also done depending on the exact application and requirements.
SIMCO specializes in manufacturing copper earthing jumpers. With the help of our highly skilled personnel, adoption of latest technologies and by using raw materials of utmost quality, we have been able to provide earthing jumpers to many government, semi-government and major private organizations in the Oil&Gas and Chemical Industry. We can practically manufacture the braids of any length and cross-section area along with termination lugs and ferrules with hole dia as per customer’s requirements.
Copper earthing jumper helps in passing the static current from source to earth, thus preventing the hazards caused by static electricity. Static electricity is nothing but an unbalanced electric charge within or on the surface of a material. The electric charge remains until it is able to get discharged by means of an electric current or electrical discharge. It is created whenever two surfaces contact and separate, and at least one of them has a higher resistance to electric current (and is, therefore, an electrical insulator). If proper measures are not taken then the sparks generated through static energy can lead to explosions and industrial fire. Hence, proper bonding or grounding needs to be ensured. Braided copper is the most preferred method for effective bonding as its a strong conductor.
Applications of Earthing Jumpers:
View Complete details